Hot Tub & Spa Removal in Palm Beach County
That hot tub on the back patio hasn’t worked in two years. The shell is cracked, the jets are corroded, and the cover is falling apart. It’s taking up half the deck, it’s an eyesore, and you have no idea how to get 500+ pounds of fiberglass and plumbing out of your backyard. We do. We disconnect it, break it down, carry it out piece by piece, and haul every bit of it away — same day in most cases.
South Florida is hard on hot tubs. The humidity, the salt air near the coast, the UV exposure year-round — all of it accelerates the breakdown of shells, covers, pumps, and cabinetry. If your spa has reached the end of its life, we’ll get it out of your yard so you can reclaim the space.
How Hot Tub Removal Works
Step 1: Electrical disconnection. Hot tubs are typically hardwired to a dedicated 220V/240V circuit with a disconnect panel nearby. A licensed electrician needs to disconnect the power before we arrive. This is required — we don’t do electrical work. If you don’t have an electrician, let us know and we can recommend one who can handle the disconnect quickly, usually the same day or the day before your removal appointment.
Step 2: Drain the water. The tub needs to be drained before we break it down. Most hot tubs have a drain valve at the bottom — open it the night before and let it gravity-drain into the yard or connect a garden hose to direct the water where you want it. If the drain valve is broken or corroded (common in older South Florida tubs), we can pump the remaining water out on-site. Just let us know the situation when you call so we can plan for it.
Step 3: We break it down on-site. Hot tubs don’t fit through gates, around pool cages, or into trailers in one piece. We use reciprocating saws and hand tools to cut the shell into manageable sections right on your patio or deck. The cabinetry, frame, plumbing, pump, motor, and insulation all come apart and get loaded piece by piece. The whole breakdown usually takes one to three hours depending on the size of the tub, the material (acrylic vs. rotomolded), and the access situation.
Step 4: Haul-away and cleanup. Every piece goes into the trailer. We sweep the area where the tub sat and leave the space clean and clear. The pad or platform underneath stays in place unless you want it removed too — if so, we can include concrete pad removal in the same job. Materials go to the appropriate disposal and recycling facilities — metal components to scrap recyclers, everything else to the solid waste facility.
Types of Hot Tubs & Spas We Remove
We’ve removed every type of residential hot tub and spa found in Palm Beach County — from compact two-person units to full-size eight-person spas.
Above-Ground Portable Spas
The most common type in Palm Beach County — freestanding acrylic or rotomolded spas that sit on a concrete pad, paver patio, or reinforced deck. Brands like Jacuzzi, Hot Spring, Sundance, Caldera, and Bullfrog. These range from 400 to 800+ pounds empty and are too heavy and wide to move in one piece through most gates and side yards. We cut them down on-site and carry the sections out.
In-Ground & Built-In Spas
Some homes in Palm Beach County have spas built into the pool deck or integrated into a patio structure. Removing these is more involved — the shell needs to be cut out, the surrounding decking may need repair, and the plumbing that connects to the pool system needs to be properly capped. We handle the spa removal and demolition portion. If the surrounding deck needs resurfacing or the pool plumbing needs modification, we can coordinate with the appropriate contractors.
Swim Spas & Large Units
Swim spas are longer and heavier than standard hot tubs — some models run 12–19 feet long and weigh over 2,000 pounds empty. The removal process is the same (disconnect, drain, cut apart, haul) but takes more time and more trailer space. We handle swim spas from brands like Endless Pools, Master Spas, and TidalFit. If you’ve got a large unit, send us photos with dimensions so we can quote accurately.
Access & Logistics in South Florida Backyards
Pool cages and screen enclosures. Most hot tubs in Palm Beach County sit inside a screened pool enclosure. That means the tub has to be cut into sections small enough to carry through the screen enclosure door — which is typically 3 feet wide at most. We plan the cut pattern around your specific access point so every piece fits through without damaging the screen or the frame.
Narrow side yards and gated access. Once the pieces are out of the enclosure, they still need to get from the backyard to the trailer in the driveway. We carry sections through side yard gates, down narrow walkways, and around landscaping. Send us a photo of the path between the hot tub and the driveway when you request a quote so we can plan the most efficient route.
Elevated decks and upper-floor patios. Some homes have hot tubs on raised decks, rooftop patios, or second-floor balconies. These require additional planning for how to get sections down safely. We assess the access situation before quoting and factor any additional labor into the price upfront — no surprises on removal day.
Hot Tub Removal FAQ
How much does hot tub removal cost?
Hot tub removal pricing depends on the size of the unit, the material (acrylic shells take longer to cut than rotomolded), the access situation (screen enclosure, narrow side yard, elevated deck), and whether you also want the concrete pad removed. We quote every job individually after seeing photos or doing a quick on-site look. Send us a few photos — the hot tub itself, the access path, and the gate or enclosure door — and we’ll get you a firm price.
Do I need to disconnect the hot tub before you arrive?
Yes. The electrical power needs to be disconnected by a licensed electrician before we can begin the removal. Most hot tubs are hardwired to a 220V/240V dedicated circuit — this isn’t something you can just unplug. If you need an electrician recommendation, ask us when you schedule and we’ll point you to someone local who can handle it quickly.
Do I need to drain the hot tub first?
Ideally, yes. Open the drain valve the night before and let it empty by gravity. If the drain valve is broken, corroded, or won’t open — which happens often with older tubs in South Florida’s climate — let us know and we’ll pump the remaining water out on arrival. A small amount of residual water in the bottom is normal and won’t affect the removal.
How long does the removal take?
Most standard portable hot tub removals take two to four hours from start to finish — that includes the on-site breakdown, carrying sections out through the yard, loading the trailer, and sweeping the area. Larger spas, swim spas, or tubs with difficult access (tight enclosures, elevated decks, long carry paths) can take longer. We’ll give you a time estimate when we quote the job.
Can you remove the concrete pad underneath too?
Yes. If you want the concrete pad, reinforced slab, or paver base removed after the hot tub is gone, we handle that as part of the same job. We break up the concrete, load it into the trailer, and haul it to the disposal facility. This is a common add-on — most people don’t want a random concrete rectangle sitting in their backyard after the tub is gone. Let us know when you request your quote and we’ll include it in the price.
Will the removal damage my screen enclosure or pool cage?
We take careful measures to prevent damage to your screen enclosure. All shell sections are cut to fit through the enclosure door opening. We protect the door frame and screen panels during the carry-out process. That said, if your enclosure is old, brittle, or already damaged, there’s always some risk when moving heavy items through a tight opening. We’ll assess the condition during the quoting process and let you know if there are any concerns before we start.
Ready to Get Rid of That Hot Tub?
Send us a few photos of the tub, the access path, and the gate or enclosure door. We’ll send back a firm removal price — usually within the hour.
Scheduled service Mon–Sat, 7 AM – 6 PM | Same-day removal available